Autumnal sealant rage
Autumnal sealant rage
Just thought I'd ask...
Has anyone ever solved the problem of sealant setting over time in the the tube's spout resulting in all sorts of wrestling shennanigans? I've tried the usual tape, nails, screws, caps etc but just thought that a clever solution may have been devised by someone...
...on the assumption that most sealants are 'air drying' I wonder whether keeping the stuff in a bucket of water is the answer?!
Has anyone ever solved the problem of sealant setting over time in the the tube's spout resulting in all sorts of wrestling shennanigans? I've tried the usual tape, nails, screws, caps etc but just thought that a clever solution may have been devised by someone...
...on the assumption that most sealants are 'air drying' I wonder whether keeping the stuff in a bucket of water is the answer?!
Tideway 206
11+
Sold the 'Something bigger and plastic', it never got used.
11+
Sold the 'Something bigger and plastic', it never got used.
Re: Autumnal sealant rage
Unscrew nozzle cover thread with plastic film of some description, then screw nozzle back on, this works. Clean nozzle with a 6mm drill bit, hold nozzle then spin drill bit into set sealer, this will clean out old set sealer and give you a usable nozzle, be careful though.
Re: Autumnal sealant rage
This reminds me of the poor chap who won the Wingnut at Hunts in 2013.
The Peril
Agamemnon
Lovely little Cadet
OK 1954
Xena Warrior Princess
Finn 469
Laser 2
Wayfarer World
Agamemnon
Lovely little Cadet
OK 1954
Xena Warrior Princess
Finn 469
Laser 2
Wayfarer World
Re: Autumnal sealant rage
I should perhaps have said, remove nozzle when required and drill from the threaded end
and hold nozzle with a pair of pliers
What was the wingnut awarded for ??
and hold nozzle with a pair of pliers
What was the wingnut awarded for ??
Re: Autumnal sealant rage
Wrestling with a tube of sealant then ending up wearing most of it.
The Peril
Agamemnon
Lovely little Cadet
OK 1954
Xena Warrior Princess
Finn 469
Laser 2
Wayfarer World
Agamemnon
Lovely little Cadet
OK 1954
Xena Warrior Princess
Finn 469
Laser 2
Wayfarer World
-
- Posts: 43
- Joined: Sat Nov 10, 2012 12:11 pm
- Location: Warwickshire
Re: Autumnal sealant rage
Seem to remember that was Tom
Paul
Sandwell Valley SC
Mirror 39
Mirror 10546. Mirror 24184
Albacore 1455. Firefly 2705
Wyche & Coppock 16' awaiting restoration.
Gull Mk 3
Minisail Monaco 1. Monaco II 2343
Sprint I 3400. Sprint II 4240
Sprite 806. Dished deck Monaco 1
Sandwell Valley SC
Mirror 39
Mirror 10546. Mirror 24184
Albacore 1455. Firefly 2705
Wyche & Coppock 16' awaiting restoration.
Gull Mk 3
Minisail Monaco 1. Monaco II 2343
Sprint I 3400. Sprint II 4240
Sprite 806. Dished deck Monaco 1
Re: Autumnal sealant rage
What colour was it ?
Re: Autumnal sealant rage
That the memory is sealed in your mind, stuck forever would imply that the colour was cat poo?
Tideway 206
11+
Sold the 'Something bigger and plastic', it never got used.
11+
Sold the 'Something bigger and plastic', it never got used.
Re: Autumnal sealant rage
it was white and somewhere there is a pic
Hornet 191 Shoestring,
Hornet 595 Demon awaiting restoration
Hornet 610 Final Fling
Hornet 353
Hornet 595 Demon awaiting restoration
Hornet 610 Final Fling
Hornet 353
-
- Posts: 51
- Joined: Mon Mar 07, 2005 3:42 am
- Location: United Kingdom
Re: Autumnal sealant rage
Most modern sealants are moisture curing. If the tube has a cap, remove the nozzle and use it!. If its a gun cartridge you are probably S.O.L. but you could try pouring some candlewax down the ass end of the tube and rolling it around then tipping out the excess to reseal the piston and cap the end the nozzle goes on with a small piece of foil then tape up thoroughly.
For optimum life, pack all your tubes together in an airtight bag or tupperware box, with a fresh desiccant sachet, and if possible store at the lowest temperature permitted in the datasheet, or at least keep them cool!
For optimum life, pack all your tubes together in an airtight bag or tupperware box, with a fresh desiccant sachet, and if possible store at the lowest temperature permitted in the datasheet, or at least keep them cool!
Ian Malcolm. London, ENGLAND. (FORUM REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & >32K emails --> NUL:
'Stingo' Albacore #1554 - 15' Early 60's, Uffa Fox designed,
All varnished hot moulded wooden racing dinghy.
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & >32K emails --> NUL:
'Stingo' Albacore #1554 - 15' Early 60's, Uffa Fox designed,
All varnished hot moulded wooden racing dinghy.