Holt mast step plate

share hints, tips and experiences
JimC
Posts: 1710
Joined: Sun Oct 03, 2004 10:24 pm
Location: Surrey
Contact:

Post by JimC » Thu Apr 26, 2007 10:26 pm

My guess would be a Holt spar, but I wouldn't bet money.

Chris M
Posts: 14
Joined: Sun Nov 06, 2005 4:13 pm

Post by Chris M » Fri Apr 27, 2007 7:32 am

Ent masts are east to find used if you're in the association.

Should cost about £100 for a half decent proctor D+ which is pretty much what you'll pay for new spreaders!

Pat
Posts: 2445
Joined: Mon Sep 27, 2004 1:42 pm
Location: West Wiltshire (Wessex)

Post by Pat » Fri Apr 27, 2007 12:54 pm

That makes two of us hunting for old proctor spreaders at the jumble!! We've got to replace the ones we "borrowed" from a Lark after Half Cut and Terrapin blew over at Dorchester on Thames.
(Half Cut and What a Lark Removals Ltd)

davidh
Posts: 3160
Joined: Wed Dec 28, 2005 10:43 am
Location: Ventor Isle of Wight

Post by davidh » Fri Apr 27, 2007 1:58 pm

Pat,

I wish I'd I'd known earlier! I routed around and found a bracket for Gannet and sent it up to Gary. I may have another........ do you want me to look?

Pat - our number here is 02380 404347 or Mobile 07847 280302.

Can you call?

David
David H

Lorry
Posts: 11
Joined: Wed Jun 28, 2006 9:43 am
Location: United Kingdom

Post by Lorry » Fri Apr 27, 2007 2:26 pm

Graham, the mast on B&O is in Yorkshire and I'm in Southampton but cheers anyway.

Pat, lets hope the spreaders aren't spread too thin - I'll get me coat...
Lorry

User avatar
neil
Site Admin
Posts: 1623
Joined: Tue Aug 31, 2004 10:33 pm
Location: Plymouth

Post by neil » Sat Apr 28, 2007 10:06 pm

I have a bracket and spreaders from a Proctor mast that I've just stripped. Any takers?
IC: K26
Harrier +: 2

Zenith's rebuild - www.pegasus18.com/zenith

Pat
Posts: 2445
Joined: Mon Sep 27, 2004 1:42 pm
Location: West Wiltshire (Wessex)

Post by Pat » Mon Apr 30, 2007 10:31 pm

I've just got back on the site after a few days and Beaulieu. We got a pair of spreaders which should do the job, but thanks anyway folks.
Also picked up new sailing bags, a roll of cover material and a bargain lot of fibreglass mat that was originally asking a pound a sheet and ended up with "50p a sheet, OK I'll take a fiver's worth" at the very end so the guy grabbed two huge handfuls and rolled it up - must have been twice as much as we expected for the fiver!
We also admired Leon's (new owner of Peggie 119) T shirts - if we need any cvrda ones he's a good supplier and a Shearwater member.
(Half Cut and What a Lark Removals Ltd)

Lorry
Posts: 11
Joined: Wed Jun 28, 2006 9:43 am
Location: United Kingdom

Post by Lorry » Tue May 01, 2007 10:21 am

Me too Pat - it was a good day out. At the start I was cursing those folks with various trolleys and barrows but by lunch I was quite jealous. I found some spreaders which look like I can make fit as well as loads of rope, blocks, trailer bits, oh and a new wetsuit! The Mrs literally pulled me away from that very interesting Tri project and I didn't get to find out anything about it. Anyone know what it was?

Neil, it might be a few weeks before I can get the old pole up and have a fiddle with the bits I now have, but I will bear your offer in mind. Cheers.
Lorry

Post Reply