In photo 3 I can see the boat's centreboard and the top of the case where I'd expect it to be. It is a bit worrying though!PeterV wrote:But is that centreboard case the one out of the bottom of this hull or another?
It's not an Enterprise... but what is it??
-
- Posts: 282
- Joined: Mon Jan 31, 2011 8:39 pm
- Location: Staffordshire
Re: It's not an Enterprise... but what is it??
Best wishes
SB
SB
Re: It's not an Enterprise... but what is it??
Hi,
I checked with the seller and the hull is intact.
Steve
I checked with the seller and the hull is intact.
Steve
STEVE
Mermaid 137
Laser 41420
Streaker 1331
Mermaid 137
Laser 41420
Streaker 1331
-
- Posts: 4
- Joined: Fri Sep 30, 2016 10:32 pm
Re: It's not an Enterprise... but what is it??
Just a couple of points the boat is not a mark 1 Osprey only two mark ones were made, they had a taller mast and a larger rig, this is a mark two. The Mark two continued until no 1000 which was a prototype for the mark 3 and had the name "Tomorrow's world" which had no rear tank a central spinnaker chute and kept the original width side tanks. As a ex Osprey measurer I know there are a number of issues in building, or carrying out a major repair to an old Osprey. Unless you are familiar with the class or very experienced in translating the measurement rules I would suggest caution.