Shroud/stay adjusters - pair of

Post your requirements here
Post Reply
slimtim
Posts: 57
Joined: Thu Nov 20, 2014 8:23 pm

Shroud/stay adjusters - pair of

Post by slimtim »

Hello

I'm currently using a pair of Holt vernier-type adjusters. These are a bit too short - the maximum eye to eye measurement being 9cm.

Does anyone have a set of this type of adjuster which is longer (maximum measurement in the range 11-14 cm) or maybe some screw-type adjusters which will cater for the same (the shortest I can find are 13cm eye to eye so not ideal).

Thank you in advance.
User avatar
JB9
Posts: 416
Joined: Wed Apr 09, 2008 8:52 am
Location: BBSC, Kent, UK

Re: Shroud/stay adjusters - pair of

Post by JB9 »

If you can use the screw type I found this company very reasonable:-

https://premierfittings.co.uk/316-stain ... ing-screw/
Harrier 25
505 7163
slimtim
Posts: 57
Joined: Thu Nov 20, 2014 8:23 pm

Solution found, please close

Post by slimtim »

In the end, I bought another set of the vernier adjusters and they will link to the original set - so effectively making a double length. This will give plenty of adjustment and still look pretty neat.

Case closed!
Post Reply