Varnish over Deks Olje #1

share hints, tips and experiences
Post Reply
wilfbishop1
Posts: 22
Joined: Wed Sep 15, 2010 6:12 pm

Varnish over Deks Olje #1

Post by wilfbishop1 » Mon Feb 03, 2020 9:03 pm

How do folks feel about application of conventional yacht varnish over Deks Olje D1? I like the idea if Deks Olje D1 saturating the wood but in my experience Deks Olje D2 as a finish coat seems to be relatively “soft” and damage-prone. OK on wooden spars where wear and impact damage are less likely but not so good on high wear and impact zones. Do people have practical experience of this combination? It seems instinctively better to varnish onto a stable saturated wood surface than bare wood?

Wilf Bishop

User avatar
PeterV
Posts: 1218
Joined: Thu Sep 16, 2004 8:47 pm
Location: Locks Heath, Hampshire

Re: Varnish over Deks Olje #1

Post by PeterV » Tue Feb 04, 2020 11:25 am

Wilf, I've been using conventional varnish on Django's mast and it's been fine, I think you said you'd used Deks Olje on it before.
PeterV
Finn K197 & GBR564
Warsash

Michael4
Posts: 501
Joined: Fri Jan 03, 2014 5:25 pm
Location: West Sussex

Re: Varnish over Deks Olje #1

Post by Michael4 » Tue Feb 04, 2020 6:20 pm

I gave up with D2, the finish was super but as you say, a bit soft and when wet it is very slippery. Not much good for dinghies but great for brightwork on bigger boats.

D1 seems like an excellent idea and if allowed to go off properly varnish will be fine. The only thing I don't know is how much difference it actually makes. On old mahogany that has gone or is going black (starting to rot) it soaks in impressively, on wood that is in good shape less so.

I had occasion to saw something up that I had previously done the D1 job on. It didn't seem to have soaked in very far. Maybe I was expecting too much.

Anyway, using D1 is pleasant and surely it can't do any harm. Presumably there are other similar products or even linseed oil that might be cheaper?

I always use 'normal' varnish.
Tideway 206
11+
Sold the 'Something bigger and plastic', it never got used.

chris
Posts: 2452
Joined: Sat Sep 18, 2004 7:43 pm
Location: somerset

Re: Varnish over Deks Olje #1

Post by chris » Fri Feb 07, 2020 2:45 pm

i once used D1 and D2 on an edwardian punt. I agree that D2 is soft etc as it soon showed problems. i sure another proper varnish will work ove D1 as long as sufficient time is left between the two.
l have used linseed and (real) turpentine, half and half, since then followed by varnish and can say that worked very well.

Post Reply