Buoyancy bags
See
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... RK:MEWA:IT
These are 48" long x 12" wide and was wondering if they would do OK as buoyancy bags for my Merlin. They appear regularly from this seller and I have contacted a previous buyer who says they are a rubbery material with a cloth type of finish and seem pretty tough. There is room for them to go under the fore deck and stern deck ie two each side and therefore seem a prettty cheap option (the price is for 2).
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... RK:MEWA:IT
These are 48" long x 12" wide and was wondering if they would do OK as buoyancy bags for my Merlin. They appear regularly from this seller and I have contacted a previous buyer who says they are a rubbery material with a cloth type of finish and seem pretty tough. There is room for them to go under the fore deck and stern deck ie two each side and therefore seem a prettty cheap option (the price is for 2).
I think others might disagree....but personally I think they look just fine!
You will need some other straps as well as the two end ones.
I would make a canvas cover with 4 attached straps
If they come up again....I think I might be up for a few myself
cheers
eib
You will need some other straps as well as the two end ones.
I would make a canvas cover with 4 attached straps
If they come up again....I think I might be up for a few myself
cheers
eib
Ed Bremner
CVRDA
Jollyboat J3
Firefly F2942
IC GBR314 ex S51 - 1970 Slurp
MR 638 - Please come and take it away
Phelps Scull
Bathurst Whiff - looking for someone to love it
CVRDA
Jollyboat J3
Firefly F2942
IC GBR314 ex S51 - 1970 Slurp
MR 638 - Please come and take it away
Phelps Scull
Bathurst Whiff - looking for someone to love it
These seem to be able to double up as boat rollers.
Boat rollers seem to have rather gone out of fashion now that every boat has a trolley....but it always amazes me how recently trolleys have been around. It was not that long ago that you stored your boat on the ground with a chock under it....and then moved it by getting 3 people to help you lift it....or you put in on rollers.
I have always liked the idea of sailing somewhere and then getting out and pulling out a couple of bags/rollers and using those to drag boat up the beach for a little rest and recoup....maybe with a pint or two....then back down the beach again and off.
cheers
eib
Boat rollers seem to have rather gone out of fashion now that every boat has a trolley....but it always amazes me how recently trolleys have been around. It was not that long ago that you stored your boat on the ground with a chock under it....and then moved it by getting 3 people to help you lift it....or you put in on rollers.
I have always liked the idea of sailing somewhere and then getting out and pulling out a couple of bags/rollers and using those to drag boat up the beach for a little rest and recoup....maybe with a pint or two....then back down the beach again and off.
cheers
eib
Ed Bremner
CVRDA
Jollyboat J3
Firefly F2942
IC GBR314 ex S51 - 1970 Slurp
MR 638 - Please come and take it away
Phelps Scull
Bathurst Whiff - looking for someone to love it
CVRDA
Jollyboat J3
Firefly F2942
IC GBR314 ex S51 - 1970 Slurp
MR 638 - Please come and take it away
Phelps Scull
Bathurst Whiff - looking for someone to love it
That's what it's like for me now with the canoe. Pull a bit, rest, pull a bit, rest - no pints in between though.
The bags sound a great idea for in-between races though, rather than leave it on the shoreline, floating, pull it up on the bags & then no need for a plethera (sp?) of trolleys on the shoreline!!
The bags sound a great idea for in-between races though, rather than leave it on the shoreline, floating, pull it up on the bags & then no need for a plethera (sp?) of trolleys on the shoreline!!
The only canoe sailor in MY village too !
OK K1958
Mirror 34459
http://www.stuandliz.co.uk
****************************
make bow waves not chat
****************************
OK K1958
Mirror 34459
http://www.stuandliz.co.uk
****************************
make bow waves not chat
****************************
I came across these and wondered whether they would look good around buoyancy bags to protect them from roves and rivets and certainly might be easier than making up canvas bags.
http://www.fender-socks.co.uk/
Any thoughts
http://www.fender-socks.co.uk/
Any thoughts
-
- Posts: 51
- Joined: Mon Mar 07, 2005 3:42 am
- Location: United Kingdom
So you *WANT* to trap moisture between the bag and the hull?
I would rather put some time into smoothing the interior end on fastenings with a dob of epoxy.
Rather than fully enclosing the bag, has anyone consirered making up a canvas sheet to hold it into place and protect it where one comes into contact with it with eyelets round the edge so it can be laced into place?
I would rather put some time into smoothing the interior end on fastenings with a dob of epoxy.
Rather than fully enclosing the bag, has anyone consirered making up a canvas sheet to hold it into place and protect it where one comes into contact with it with eyelets round the edge so it can be laced into place?
Ian Malcolm. London, ENGLAND. (FORUM REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & >32K emails --> NUL:
'Stingo' Albacore #1554 - 15' Early 60's, Uffa Fox designed,
All varnished hot moulded wooden racing dinghy.
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & >32K emails --> NUL:
'Stingo' Albacore #1554 - 15' Early 60's, Uffa Fox designed,
All varnished hot moulded wooden racing dinghy.
Ian,
yes, that is what I have done many times and what I was trying to recommend earlier in this thread. The covers are easy to make, hold the bag much better in place, keep the bag out of the UV and look great.
It is not an original idea....I have seen it done before....but I have no idea why it is not done more regularly. I don't think it traps any more moisture than just having the bags securely placed. In fact if you let a little air out...which of course we should all do anyway I think it is most probably better.
cheers
eib
yes, that is what I have done many times and what I was trying to recommend earlier in this thread. The covers are easy to make, hold the bag much better in place, keep the bag out of the UV and look great.
It is not an original idea....I have seen it done before....but I have no idea why it is not done more regularly. I don't think it traps any more moisture than just having the bags securely placed. In fact if you let a little air out...which of course we should all do anyway I think it is most probably better.
cheers
eib
Ed Bremner
CVRDA
Jollyboat J3
Firefly F2942
IC GBR314 ex S51 - 1970 Slurp
MR 638 - Please come and take it away
Phelps Scull
Bathurst Whiff - looking for someone to love it
CVRDA
Jollyboat J3
Firefly F2942
IC GBR314 ex S51 - 1970 Slurp
MR 638 - Please come and take it away
Phelps Scull
Bathurst Whiff - looking for someone to love it
-
- Posts: 51
- Joined: Mon Mar 07, 2005 3:42 am
- Location: United Kingdom
The comments I made regarding trapping moisture were in response to the 'fender socks' suggestion. I considered covers over bags at one stage, but wound up strapping in two 8x24" fenders. (Stingo is fully tanked but needs a little extra buoyancy in the stern)
Ian Malcolm. London, ENGLAND. (FORUM REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & >32K emails --> NUL:
'Stingo' Albacore #1554 - 15' Early 60's, Uffa Fox designed,
All varnished hot moulded wooden racing dinghy.
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & >32K emails --> NUL:
'Stingo' Albacore #1554 - 15' Early 60's, Uffa Fox designed,
All varnished hot moulded wooden racing dinghy.
The original posting about fenders/boat rollers is defunct as I managed to get the last two (dammit I really could have done with four) but came across this and thought that they may be OK. Should be on this page - 2 sizes.
http://www.force4.co.uk/acatalog/Online ... s_104.html
http://www.force4.co.uk/acatalog/Online ... s_104.html
-
- Posts: 20
- Joined: Thu Apr 07, 2005 4:37 pm
Hey Garry - fancy finding you here (Andy from Abdn btw! - restored a Merlin last summer!)
See you've acquired another! Since chatting last I've rebuilt a '72 Solo which I'm racing regularly and she won last weekend! Also just bought a classic I14...she's a bit of a historic boat so had to have her!
How's the 'new' Merlin coming on?
See you've acquired another! Since chatting last I've rebuilt a '72 Solo which I'm racing regularly and she won last weekend! Also just bought a classic I14...she's a bit of a historic boat so had to have her!
How's the 'new' Merlin coming on?