I need to make some sail battens both for the Merlin and Tideway.
Any suggestions as to the best source of materials, either wood or plastic? Much as I love the old tapered Ratsey battens they are now wrapped in tape, re-enforced by old school rulers, bits of plastic etc etc.
Not sure what the original wood would have been...
I guess I want something sold by the metre and strong enough for the top Merlin batten, the one that supports the majority of the roach...if my terminology is correct...
Michael
Sail Battens
Sail Battens
Tideway 206
11+
Sold the 'Something bigger and plastic', it never got used.
11+
Sold the 'Something bigger and plastic', it never got used.
-
- Posts: 1663
- Joined: Fri Jul 06, 2007 7:11 pm
- Location: Gosport, UK
Re: Sail Battens
I have full length battens on my Canoe which I believe are made of Ash.
The support of the roach simply requires a non-compressible batten for which anything will pretty much oblige, If however you want some fancy curves in the sail profile, it needs to be flexible, (which I believe is where Ash comes in.)
You can if you're clever find tufnol battens for originality and unlimited flexibility. (I've used mine as liner for the (rotating) mast gate in my firefly.)
though these do not allow a graded range from stiff (at the leach end) to flexible.
Nowdays with modern materials you can take your pick. Stronger, lighter and more flexible fiberglass or carbon. Far better than Ash or any other wood, but not in the "Classic" (original) spec of course.
It all depends on what you are looking for in the racing / sailing of the boat.
The support of the roach simply requires a non-compressible batten for which anything will pretty much oblige, If however you want some fancy curves in the sail profile, it needs to be flexible, (which I believe is where Ash comes in.)
You can if you're clever find tufnol battens for originality and unlimited flexibility. (I've used mine as liner for the (rotating) mast gate in my firefly.)
though these do not allow a graded range from stiff (at the leach end) to flexible.
Nowdays with modern materials you can take your pick. Stronger, lighter and more flexible fiberglass or carbon. Far better than Ash or any other wood, but not in the "Classic" (original) spec of course.
It all depends on what you are looking for in the racing / sailing of the boat.
Michael Brigg
Re: Sail Battens
My understanding is that hickory was conventional.
Re: Sail Battens
I was lucky, I put an ask out for wooden battens and got a set of Solo ones which cut down nicely for the Hornet, I was short of one shortish batten which Chris Barlow kindly made for me with Ash I believe.
There are probably old sets of battens in rafters of sheds all over the country, try asking on the solo association website.
There are probably old sets of battens in rafters of sheds all over the country, try asking on the solo association website.
Hornet 191 Shoestring,
Hornet 595 Demon awaiting restoration
Hornet 610 Final Fling
Hornet 353
Hornet 595 Demon awaiting restoration
Hornet 610 Final Fling
Hornet 353
Re: Sail Battens
Jack (Holt) always used ash.