Duckling Dinghy Floor Panels

share hints, tips and experiences
Post Reply
wilfbishop1
Posts: 21
Joined: Wed Sep 15, 2010 6:12 pm

Duckling Dinghy Floor Panels

Post by wilfbishop1 » Thu Dec 19, 2019 10:32 pm

I am in the final stages of restoring a Fairey Duckling dinghy and have obtained a set of floor boards as shown in the original Uffa Fox drawings that I have repaired and am stripping for refinishing. I have a set of these drawings BUT I seem to have lost the one drawing showing the floorboard fixing details. The floorboards seem to be held in place sitting against the inside keelson by means of a fitting attached to the inside of the hull that protrudes thro' a slot in the wide outboard element of the floorboard.
Can anyone clarify this attachment system for me OR take a photo of the relevant part the drawing showing this arrangement OR take a photo of the detail in question on an actual Duckling please?
Any help would be most appreciated.

Many thanks,
Wilf Bishop

JimC
Posts: 1710
Joined: Sun Oct 03, 2004 10:24 pm
Location: Surrey
Contact:

Re: Duckling Dinghy Floor Panels

Post by JimC » Sat Dec 28, 2019 9:31 pm

Conventionally it would have been just a toggle that fitted through the hole and was then rotated 90 degrees.

Post Reply